Thoughts on Hollinger Hollow 2012...

Hey everyone,

Well, I've looked over all the pictures taken of this years preparation and display and I don't think there's anything left to say.  I'm afraid I've exhausted every topic worth talking about.  :(

Still, there are things we didn't get to do and I may as well discuss those.  If you look at one of the first posts from this year you will see a list of things we wanted to accomplish.  Let's take a look at that list and see what we were able to do.

Professional Fog Machines:  This year we were able to pick up a couple of really, really good fog machines.  We weren't able to get the big, bad ones we wanted as the place we went to get them didn't have them in stock and couldn't get them in the time we wanted.  We ended up buying two that in appearance looked just like the ones you could buy at any party store but the truth is they are built better and guaranteed to work or they will be fixed for free.  This was good enough for us as they worked wonderfully and we couldn't be happier.  Next year, we need to pick up two more and put a fog machine in all four corners of the Hollow!

New Bridge :  Absolutely finished this one!  The new bridge made the Hollow completely handicapped accessible for the first time ever and I couldn't be happier!  Not only was the slope commercial grade (12 degrees for wheel chairs and walkers) but it exceeded the required width of 32 inches and instead was 48 inches wide.  Plus, with the addition of some really cool skulls and some moss it looked really creepy in the green lights and fog.  I am so very pleased with this new bridge.

Animate Hell Hole Guy:  This we weren't able to do.  The Hell Hole guy was exactly as static as he's been for the last couple of years.  That's OK though.  He still looked very cool.

New Fence Columns:  Done!  If you've read the blog then you've seen the new exit columns.  I am very particular with everything I build, building it first in Google Sketch-up so I can figure out what I will need to build it and figure out how much it will cost.  For some reason, I didn't do that when I built the first columns.  When it came time to build the new columns I couldn't even get to the old columns, which were buried in the back of storage so I basically guessed on the dimensions.  I got the height right but guessed a few inches too big on the length and width.  Consequentially, these new columns are a little bigger than the old ones.  Still, they look great and I am hoping nobody noticed how much larger the exit columns were than the enter columns.  If they did, nobody told me.  Let's see if anyone mentions in next year.  :)

New Fencing:  Another project completed!  For the first time, the Hollow was completely surrounded with our "iron" fencing.  This was a huge improvement as we initially used landscape fencing to mark the pathway and perimeter of the graveyard.  I am so happy do be done with that.

New Mausoleum Guy:  Well, we kind of accomplished this.  We weren't able to find a popup guy for the mausoleum that we liked better than what we already had, which was a sound activated reaper.  Prior to this prop we had a similar looking reaper but he was remote controlled.  When he broke, we weren't able to find a remote control reaper but did find a sound activated reaper.  Last year we had a problem with people not being loud enough to trigger him consistently.  This year, thanks to the new "iron fencing" the mausoleum was pushed closer to the pathway and that seemed to make all the difference with how easily he was activated.  So, we didn't need to get a new pop-up prop but we did add something new to the mausoleum, the creepy picture of the kids and a sound activated bat prop.  You can see them in the video and they are very creepy.  So, I'm calling this one kind of accomplished.  

Swampify Graveyard:  Not accomplished.  We simply ran short of budget to convert the Hollow into more of a swamp graveyard.  Maybe next year.

Tombstones:  Another sort of accomplished one.  We didn't make any new tombstones but we did add the Coffin Breaker Buy and the Ghost Face Tombstone to the graveyard so in a way we did add some new tombstones.  Still, that's now really what I meant when I said I wanted to add new tombstones so that's why this is kinda accomplished.

Finish Sarcophagus Guy:  Alas, no.  I was really hoping to close the lid on Sarcophagus guy and install a motor that would shake the sarcophagus back and forth while quickly thumping the lid making it appear as though something was trying to free itself from it's tomb.  I even bought the sound effect which would have been a low growling and snarling effect but in the end I ran out of time and wasn't able to install the motor.  We ended up throwing Bucky 2 in the sarcophagus which looked cool, but ultimately wasn't what we wanted.

New Front Facade:  Yes!  Well, no. Well, yes! No, I guess not. I did add a fake stone pattern to the gables in our facade but I didn't do anything around the windows and I truthfully don't think anyone could actually see the decorated gables in the low lighting conditions of the Hollow.  So, no, I guess I didn't finish this one. Plus, I really don't like the look of the gables.  I've got a plan for next year though and it will be interesting to see if I actually get around to it. 

Upgrade Coffin Guy for Electricity:   Nope.  I wasn't able to free the Coffin Guy from his pneumatic lifestyle.  This year, he was still powered by air and not electricity.  This is actually an interesting dilemma.  You see, most professional haunters, as well as amateurs, seem to prefer pneumatics.  This could be due to price, as after spending days looking online for deals on electric actuators the cheapest I could find them for was $250-$300!  Air power is cheaper but the compressors are loud and can be distracting for the haunt.  If we had more pneumatic props that would be one thing.  I could definitely see the advantage of pneumatics over electric.  Still, I do want more pneumatic props.  I'm really going to have to look into the pros and cons before deciding what to do next year.

And that is the end of the list.

All in all, looking back at it, I feel we accomplished more than I originally thought.  Perhaps that, along with the amazing turnout, is why I feel this year was so successful.  Still, there are a few things on this list we weren't able to do.

So, now what?

Last year I promised that we would work year round to make this year the best Hollinger Hollow.  We then did nothing for ten months and it really kicked our butts.

That's why we've decided that this year we actually WILL work year round to prepare for Hollinger Hollow 2013. 

So, keep coming back from time to time and see if we are keeping our word.  I wouldn't expect daily or even weekly updates but we plan on building one or two props a month starting in January (Thanksgiving, Christmas and New Year although not being as big as Halloween in our house still takes up a lot of our time) and if we do then we will definitely have plenty of updates and pics to share.

See ya!

A Shirt To Say "Thanks!"

Hey guys,

This year was a wonderful success and I want to say "thank you" to everyone who helped with making it a year to remember.

For those who assisted in the weeks leading up to, during and after Halloween I want to especially thank, and I couldn't think of a better way than by designing a shirt for everyone who helped.

I wish I could share this shirt with everyone but due to the cost of the shirts I am going to limit giving shirts to only those who specifically helped with setting up the Hollow or assisted during Halloween.

The shirt design will look like this...

I really like that logo and can't wait to see what they look like on the shirts.

For those who weren't able to help setup but who visit this blog, feel free to download the image to use however you please (just please don't use it to badmouth us).

Thanks again everyone!  And, if you helped out keep an eye out for your shirt!

Coffin Breaker Guy!

Hey guys,

So, things got really close to the wire this season, and perhaps you remember the skeleton the wife was building for a new prop this season.

If you don't remember, here's a pic...

Now, this guy was moving along at a pretty fast pace but then we got sidetracked and before we new it, we had run out of time to finish him for the new prop.

As a matter of fact, we almost didn't finish this particular prop.  The wife got really busy with the new exit columns and pumpkin toppers and I got seriously wrapped up in setting up the Hollow.

It wasn't until a couple days before Halloween that we came across Skully up there and began slapping our foreheads trying to figure out how we forgot about him.

The prop we were going to make was a Coffin Breaker, which is basically a skeleton that breaks his way out of his buried coffin.

Well, the wife asked if I could still build the coffin in time and I said I could so the plan was for me to whip up a coffin real quick and she would finish the skeleton.

So, off the garage I went, with 2 days until Halloween, and I built the framework for the coffin.

Again, this was all last minute and I didn't even think to take pictures of the building process.  I'm afraid all I got was this one picture...

The coffin is constructed with 1/4" plywood that I ripped into the various strips of wood that make the sides, the back and the base.  They are connected with pipe strapping and the screws were cut to length after installation.

Later that same day, we came across an opportunity, through a friend, to pick up a really fantastic skeleton for a very, very great price.  This ended up being perfect because we just didn't have the time we needed to complete our home made skeleton.

We decided to try the new skeleton out in this prop and he fit perfectly...

And then the wife cut out the foam pieces that would be the wood planks that make the coffin and she spray painted them brown.  Sadly, we didn't get any pictures of this process either.  It was, after all, Halloween day when she did all of this.

So, I'm afraid all we we have is a picture of the finished project, which you may remember from a previous post.  We threw a couple of shackles on his wrists and added a big chain and threw him in the Hollow, paint still wet.

And there you have him, Coffin Breaker Guy!

It's so funny, because although all this turned out to be last minute, I can honestly say he was my favorite new prop this year. 

Now we just need to come up with a new prop for old Skully up there.  Since this turned out so well, perhaps we'll wait until a couple of days from next Halloween to finish him!

Hollinger Hollow 2012 Video!

Hey guys,

Well, I figured out the problem I was having last night uploading the video.  Basically, the file size was too big.

So, after I re-compressed the file I was good to go and, as promised, here is the video.

<CAUTION> This file has sound and although it is work friendly you definitely want to check the volume on your player so as not to disturb your co-workers.  Or, if you don't care about disturbing your co-workers, CRANK IT UP!!!

Alright.  The video is a little dark, but I think it still looks good.  There are definitely some shaky parts of the video but it was taken very late in the evening, well after the busy hours, and was filmed with my phone.  Also, the re-conversion messed with the sound in parts and lessened the video quality so it's actually better to watch it in the window as opposed to full screen.

Still, it's a pretty nice little movie.

Hopefully, you can see how much fun it was and if you're looking for better images, see the pictures in the post below.

OK.  That's all for today.  Check back tomorrow as I will continue to post some updates for the rest of the week.

Later!

Hollinger Hollow 2012 Pics!

Hey guys,

Wow!  What a great Halloween!

An unofficial headcount put us over 1000 visitors to the Hollow this year!

The crowd was so big this year that at one point the traffic jam in front of our house caused the police to come out and do a little traffic control.  That honestly has never happened before!

I want to thank everyone who helped us set up this year as well as the city of Mesquite and the residents of Quail Hollow who stopped by, some on multiple occasions, and made this year the tremendous success it was.

I have been working on a video and I actually got it finished but for some reason it isn't loading to the blog.

So, as a means to appease, I've decided to take a moment and post some pictures of the evening.

As always, click the pic for a larger image...

Walking up to the Hollow.

The gargoyle entrance.

Bucky 1, one of the first props we ever built.

Good old Hollis Weeb, who died morning the loss of the love of his life.

The Mausoleum.

With a newly added photo that is honestly just too creepy.  This picture doesn't even come close to showing just how creepy this image is.

Newly added this year.  This was a last minute addition, the paint was literally still wet when we set it up Halloween night.  It turned out to be my favorite new additions of the season.  I built the frame and the wife carved and painted.  The strobe pushed it over the edge!

Phillip sits with Hollis.

The Blood Fountain!

The New Bridge.

A last minute change.  We added Bucky 2 instead of a pop-up prop to the sarcophagus this year.

Ghost Face Tombstone in action!

A better pic of Bucky 2.

The Reaper Scarecrow.  The light post next to him is a new addition.  It's flickering light was a cool effect.

Zombie Baby Stabby says "Hello" as you cross the bridge.

The Pop-Up Spider was a surprise hit this year.

Spider-Guy, Pop-Up Spider's first victim of the evening.

Coffin Guy was still the one that impressed the most.

Looking across the Hollow from the exit.

The Exit, with newly constructed columns and Pumpkin Statues!

The Hollow!

Honestly, it was a terrific night.  We literally went down to the wire this year.  I will be spending the next week updating the blog to catch everyone up.

Calling it a night for now, but more updates will follow.

Thanks again everyone!